朱銘祥教授著作目錄

　

期刊論文      研討會論文     技術報告      專利

　

A. 期刊論文

1.      Ming-Shaung Ju, and J.M. Mansour,  "Simulation of the Double Limb Support Phase of Human Gait," Tran. ASME, Journal of Biomechanical Engineering, v 110,  Aug. 1988, pp. 223-229.(SCI,EI)

2.      Ming-Shaung Ju and J.M. Mansour, " Comparison of Different methods for the Dynamics of Rigid-Body Systems Using MACSYMA," International Journal of Robotics Research, v 8, n 6, December 1989, pp. 19-27.(EI)

3.      J.H. Lin, M.S. Ju, Y.L. Chou and J.C. Wu, "Dynamical Optimal Design of Above-Knee Constant Friction Prostheses," Chinese J. Med. Biol. Eng., v 9, n 2, Dec. 1989, pp. 24-27.

4.      林昭宏,周有禮, 朱銘祥, 宋雲通, "VICON系統在步測量上的應用與評估," 高雄醫學科學雜誌第6卷第1期, 民國79年1月, pp. 6-11.

5.      林慧芬, 周有禮, 朱銘祥，吳濬哲, "步態雙支撐期下肌力的預測, "醫學工程第十卷第二期, 民國79年12月, pp. 79-84.

6.      Ming-Shaung Ju, "Simulation of Swing Phase Gait for Diagnosis of Pathological Motion," Journal of the Chinese Society of Mechanical Engineers, v 11, n 6, Dec. 1990, pp. 508-519.(EI)

7.      Ming-Shaung Ju and Chih-Jung Hsu, "Automatic Modeling of Mechatronic Systems Via Symbolic Approach,"  Mechatronics, v 1, n 2, June  1991, pp. 157-174. (NSC-78-0401-E-006-36)

8.      薛澤杰， 朱銘祥， 周有禮， "以Saunders頭套作用間歇性頸部牽引效果之角度與力量評估" ，台灣醫學會雜誌，v 9, n 12, Dec. 1991, pp. 1234-1239.

9.      彭譽之, 朱銘祥, 周有禮, 吳濬哲, "膝上義肢穿戴者之空間步態分析, "中華醫學工程學刊第十一卷第四期, 民國80年12月, pp. 166-172.

10.  T.K. Wang, M.S. Ju and Y.G. Tsuei, "Adaptive Control of Above Knee Electro-Hydraulic Prosthesis," Tran. ASME, J. of Biomechanical Engineering, v 114, n 3, August 1992, pp. 421 - 424. (NSC-80-0401-E-006-06)(SCI,EI)

11.  S.Y. Chen, M.S. Ju and Y.G. Tsuei, "Linear Structure Control by Modal Force Technique,"  JSME International Journal, Series C, v 36, n 2, June 1993, pp.203-208. (NSC-80-0401-E-006-21)(SCI,EI)

12.  M.S. Ju, Y.Y. Chung and Y.G. Tsuei, "Development of Electromagnetic Actuators for Structure Control," J. of Control Systems and Technology, v 1, n 3, July 1993, pp. 235-246. (NSC-80-0401-E-006-37)

13.  A.T. Wu, M.S. Ju and Y.G. Tsuei, "Comparison of Fuzzy Logic and Self-Tuning Adaptive Control of Single-Link Flexible Arm," Mechatronics v 3, n 4, Aug. 1993, pp. 451-464. (NSC-80-0401-E-006-37)

14.  P. J. Tsai, M.S. Ju and Y.G. Tsuei, "Development of Electrohydraulic Controlled Above-Knee Prostheses," JSME International Journal, Series C, v 36, n 3, Sep. 1993, pp. 347-352. (NSC-81-0422-E-006-07)(SCI,EI)

15.  Y.J. Fan, M.S. Ju and Y.G. Tsuei, "Experimental Study on Vibration of A Rotating Blade", Tran. ASME,  J. of Engineering for Gas Turbine & Power, v 116, n 3, July 1994, pp. 672-677.(SCI,EI)

16.  J.J. Chen, C.T. Shih, D.G. Huang, N.Y. Yu, M.S. Ju & T.C. Hsueh, "Development of FES-cycling System with Closed-Loop Control," Chinese J. Med. Biol. Eng., v 14, n 3, Sep. 1994, pp.  .

17.  M.S. Ju, S.H. Yi, Y.G. Tsuei and Y.L. Chou, "Fuzzy Control of Electrohydraulic Above-Knee Prostheses," JSME International Journal, Series C., v 38, n 1, March 1995, pp. 78-86. (NSC-81-0422-E-006-07)(SCI,EI)

18.  M.S. Ju, Y.F. Yang and T.C. Hsueh, "Gait Control of Electro-Hydraulic Above-Knee Prostheses," Biomedical Engineering-Applications, Basis & Communications, Vol. 7, No. 1, February, 1995, pp. 22-30.(NSC 84-2213-E-006-103)(EI)

19.  M.S. Ju and D.L. Yang, "Design of adaptive fuzzy controls based on natural control laws," Fuzzy Sets and Systems, v 81, 1995, pp. 191-204. (SCI)

20.  S.Y. Chen, M.S. Ju and Y.G. Tsuei, "Extraction of Normal Modes for Highly Coupled Incomplete Systems with General Damping," Mechanical Systems and Signal Processing, v 10, n 1, 1995, pp. 93-106. (EI)

21.  S.Y. Chen, M.S. Ju and Y.G. Tsuei, "Estimation of Mass, Stiffness and Damping Matrices from Frequency Response Functions,"  Tran. ASME, J. of Vibration and Acoustics, v 118, n 1, 1996, pp.78-82. (SCI,EI)

22.  S.Y. Chen, M.S. Ju and Y.G. Tsuei, "Extraction of Normal Modes from Contaminated Measurement with Noise for Highly Coupled Structures," Tran. ASME, J. of Vibration and Acoustics, v 118, n 3, 1996, pp. 430-435. (SCI,EI)

23.  N.Y. Yu, J.-J. Chen, D.-G. Huang & M.S. Ju, “Study of Muscle Fatigue in FES-Induced Dynamic Cycling Movement,” Chinese J. Med. Biol. Eng., v 16, n 1, 1996, pp. 1-15. (EI)

24.  C.-H. Lai, J.L. Gau, M.S. Ju & J.-J. J. Chen, “Development of Spasticity Measurement System for Quantitative Analysis of Stretch Reflexes in Spastic Subjects,” Chinese J. Med. Biol. Eng., v 16, n 1, 1996, pp. 16-31. (EI)

25.  J.H. Chen, M.S. Ju and Y.G. Tsuei, "Adaptive Fuzzy Logic Control of a Single Link Flexible Arm," JSME International Journal Series C, v 40, n 4, 1997, pp. 702-708. (NSC-81-0401-E-006-37)(SCI,EI)

26.  Jyh-Jier Ho, Y.K. Fang, K.H. Wu and S.C. Huang, M.S. Ju and Jing-Jenn Lin, “High-speed Amorphous Silicon Germanium Infrared Sensors Prepared on Crystalline Silicon Substrates”, IEEE Trans. on Electron Devices, vol.45, No.9, Sept., 1998,  pp. 2085-2088. (SCI, EI)

27.  Jyh-Jier Ho, Y.K. Fang, K.H. Wu, W.T. Hsien, C.W. Chu, C.R. Huang, M.S. Ju, and C.P. Chang, June, “A High Sensitivity Lead -Titanate(PbTiO3) Pyroelectric Thin-Film Infrared Sensor with Temperature Isolation Improvement Structure”, IEEE Electron Device Letters, Vol. 19, No. 6, June 1998, pp. 189-191. (SCI, EI)

28.  Jyh-Jier Ho, Y.K. Fang, K.H. Wu, W.T. Hsieh, C.H. Chen, G.S. Chen, M.S. Ju, J.J. Lin and S.B. Hwang, “High sensitivity ethanol gas sensor integrated with a solid-state heater and thermal isolation improvement structure for legal drink-drive limit detecting”, Sensors and Actuators B: Chemical B, 50/3, pp. 227-233, 15 August (1998).

29.  J.-L. Li, M.S. Ju, C.-C. Lin and K.N. An, "Modeling and Identification of Pendular Motion of the Lower Leg in Normal and Stroke Subjects," Chinese J. Med. Biol. Eng., v 19, n 1, 1999, pp. 1-9. (EI)

30.  F.Y. Chen, Jyh-Jier Ho, Y.K. Fang, C.Y. Shu, Chin-Yuan Hsu, Jiann-Ruey Chen and M.S. Ju, “Switching Transient Analysis of a Metal/Ferroelectric/ Semiconductor Switch Diode with High Speed Response to Infrared Light,” IEEE Trans. Ultrasonics, Ferroelectrics, and Frequency Control, v 46, n 3, May 1999, pp.502-510.

31.  Yu NY, Chen JJJ, Ju MS, Study of the electrically evoked EMG and torque output during the muscle fatigue process in FES-induced static and dynamic contractions, BASIC AND APPLIED MYOLOGY ,9 (1): 11-18 1999

32.  M.-S. Ju, J.-J. J Chen, H.-M. Lee, T.-S. Lin, C.-C. Lin, & Y.-Z. Huang, “Time-Course Analysis of Stretch Reflexes in Hemiparetic Subjects using an On-line Spasticity Measurement System,” J. Electromyography and Kinesiology, v 10, 2000, pp.1-14.

33.  Jyh-Jier Ho, Y.K. Fang, W.J. Lee, C.P. Chen, W.T. Hsieh, K.H. Wu, G.S. Chen, M.S. Ju and F.Y. Chen, “The Dynamic Response Analysis of a Pyroelectric Thin-film Infrared Sensor with Thermal Isolation Improvement Structure”, IEEE Trans on Electron Devices, v 46, n 12, pp. 2289-2294, 1999.

34.  Jyh-Jier Ho, Y.K. Fang, M.S. Ju, T.Y. Chen, S.F. Ting, W.J. Lee, C.R. Huang, G.S. Chen and C.Y. Chen, “Development of a micro-electro-mechanical system pressure sensor for rehabilitation engineering applications”, International J. of Electronics v 87, n 6, pp. 757-767, 2000.

35.  G.-S. Chen, M.S. Ju, Y.K. Fang, “Effects of monolithic silicon postulated as an isotropic material on design of microstructures”, Sensors and Actuators: A Physical v 86, pp.108-114, 2000.

36.  M.C. Hsieh, Y.K. Fang, M.-S. Ju, G.-S. Chen, J.-J. Ho, C.H. Yang, P.M. Wu. G.S. Wu, and T.Y. Chen, “A Contact Type Piezoresistive Micro-Shear Sensor for Above-Knee Prosthesis Application,” IEEE J. of Microelectromechanical Systems, v 10, n 1, pp. 121-127, March 2001.

37.  C.-C. K. Lin, C.-Y. Chou & M.S. Ju, “Command Trajectory of Fast Forearm Movements Estimated by Optimal Control Theory,” J. of Medical and Biological Engineering, v 21, n 2, pp. 111-120, June 2001.

38.  C.-C. K. Lin, C.-W. Lin, T.-Y. Ke & M.S. Ju, “Biomechanical Models for Modified Pendulum Test of the Upper Limb,” J. of Medical and Biological Engineering, v 21, n 4, pp. 257-263, Dec. 2001. (EI)

39.  M.S. Ju, H.C. Chien, G.S. Chen, C.-C. K. Lin, C.-H. Chang , “Design and Fabrication of Multi-microelectrode Array for Neural Prosthesis,”  J. of Medical and Biological Engineering, v 22, n 1, pp. 33-40, Mar. 2002.  (EI)

40.  M.-S. Ju, C.-C. K. Lin, J.R. Chen, H.S. Cheng, C.W. Lin,“Performance of elbow tracking under constant torque disturbance in stroke patients and normal subjects”, Clin Biomech, v17, pp. 640-649, 2002.  (EI,SCI)

41.  H.-S. Cheng, M.-S. Ju, and C.-C. K. Lin, “Improving elbow torque output of stroke patients with assistive torque controlled by emg signals,” submitted to ASME Transaction, Journal of Biomechanical Engineering, 2002

42.  C.C. K. Lin, M.-S. Ju & C.-W. Lin, “Pendulum Test for Evaluating Spasticity of the Elbow Joint,” Arch. of Physical Medicine and Rehab., v 84, pp. 69-74, Jan. 2003.

43.  C.-C. K. Lin, M.-S. Ju & C.-H. Huang, “Influence of Passive Movements on m Wave,” J. of Medical and Biological Engineering, v 23, n 1, pp. 27-33, Mar. 2003

44.  M.-S. Ju, C.-C. K. Lin, J.-L. Fan, R.-J. Chen, “Transverse elasticity and blood perfusion of sciatic nerves under in situ circular compression,” J. of Biomechanics, 2006, v 39, pp.97-102. (EI, SCI)

45.  C.H. Chang, J.D. Liao, J.J.-J. Chen, M.S. Ju, C.-C.K. Lin, “Cell adhesion and related phenomena on the surface-modified Au-deposited nerve microelectrode examined by total impedance measurement and cell detachment tests ”, Nanotechnology, 2006, v 17, pp. 2449-2457.(SCI)

46.  C.K. Chung, P.K. Fung, Y.Z. Hong, M.S. Ju, C.C.K. Lin, T.C. Wu, “A novel fabrication of ionic polymer-metal composites (IPMC) actuator with silver nano-powders,” Sensors and Actuators B, 2006, v 117, n12, pp.367-375.(SCI)

47.  C.-C. Chiang, C.-C.K. Lin and M.-S. Ju, “An Implantable Capacitive Pressure Sensor for Biomedical Applications”, Sensors and Actuators: A Physical, Mar 2007, v134, pp. 382-388.(SCI)

48.  C.-C. K. Lin, M.-S. Ju, H.-W Huang, “Muscle Tone in Diabetic Polyneuropathy Evaluated by Quantitative Pendulum Test”, Arch Phys Med & Rehab, Mar 2007,v 88, pp. 368-373.(SCI)

49.  C.-W. Chen, C.-C. K. Lin, M.-S. Ju, “Detecting Movement-Related EEG Change by Wavelet Decomposition- Based Neural Networks Trained with Single Thumb Movement,” Clinical Neurophisiology, Apr 2007, v 118, , pp. 802-814. (SCI)

50.  W.-Y. Hsu, C.-C. Lin, M.-S. Ju, Y.-N. Sun, “Wavelet-based fractal features with active segment selection: Application to single-trial EEG data”, Journal of Neuroscience Methods, Jun 2007, v 163, pp. 145-160. (SCI)

51.  C.-C. K. Lin, M.-S. Ju, H.-S Cheng, “Model-based ankle joint angle tracing by cuff electrode recordings of peroneal and tibial nerves”, Med Biol Eng & Comput, Apr 2007, v 45, n 4, pp. 375-385.(SCI)

52.  B.-K. Fang, M.-S. Ju and C.-C.K. Lin, “A new approach to develop ionic polymer-metal composites (IPMC) actuator: fabrication and control for active catheter systems,” Sensors and Actuators: A Physical, Jul 2007, v 137, pp.321-329.(SCI)

53.  C.-C. K. Lin, M.-S. Ju, S.-M. Chen, B.-W. Pan, “A specialized robot for ankle rehabilitation and evaluation,” J of Medical & Biological Engrg. Jun 2008, v28, n2, pp. 79-86. (JMBE 2008優秀論文獎, SCI)

54.  C.-C. K. Lin, M.-S. Ju, “Applying Stochastic Resonance to Magnify  and  Wave Suppression,” Computers in Biology and Medicine, Oct 2008, v38, n10, pp.1068-1075. (EI, SCI)

55.  C.L. Huang, C.W. Chang, J.D. Liao, Y. T. Wu, M. S. Ju, and C. C. K. Lin, “Cells anchored upon a thin organic film with different nano-mechanical properties”, Applied Surface Science, Nov 2008, v 255, 301-303. (EI, SCI)

56.  H.-H. Lin, B.-K. Fang, M.-S. Ju and C.-C.K. Lin, “Control of Ionic Polymer-Metal Composites (IPMC) for Active Catheter Systems via Linear Parameter-Varying (LPV) Approach”, J Intelligent Material Systems & Structures, Feb 2009, v20, pp. 273 - 282. (EI, SCI)

57.  C.-W. Chen, M.-S. Ju, Y.-N. Sun, C.-C.K. Lin, “Model analyses of visual biofeedback training for EEG-based brain-computer interface,” J. of Computational Neuroscience, Oct. 2009, v27, pp. 357–368. (EI, SCI)

58.  C.-L. Huang, J.-D. Liao, C.-F. Yang, C.-W. Chang, M.-S. Ju, C.-C.K. Lin, ” Cell adhesion over two distinct surfaces varied with chemical and mechanical properties,” Thin Solid Films Jul 2009, v517, pp. 5386–5389. (EI, SCI)

59.  C.-W. Chen, C.-C. K. Lin, M.-S. Ju, “Hand Orthosis Controlled by Using Brain-Computer Interface,” J of Medical & Biological Engrg. Oct. 2009, v29, n5, pp.234-241. (J of Medical & Biological Engineering 2009年度最佳論文獎,中國工程師學會工程論文獎) (SCI)

60.  H.-W. Huang, M.-S. Ju, W.-C. Wang, C.-C.K. Lin, “Muscle Tone of Upper Limbs Evaluated by Quantitative Pendulum Test in Patients with Acute Cerebellar Stroke,” J of Acta Neurologica Taiwanica, Dec. 2009, v 18, n 4, pp. 250-254.

61.  B.K. Fang, C.-C.K. Lin, M.-S. Ju, “Development of Sensing/Actuating Ionic Polymer Metal-Composite (IPMC) for Active Guide-Wire System,” Sensors & Actuators: A. Physical.  Mar. 2010, v 158, pp. 1–9. (EI, SCI)

62.  R.-J. Chen, C.-C.K. Lin, M.-S. Ju, “In Situ Biomechanical Properties of Normal and Diabetic Nerves: An Efficient Quasi-Linear Viscoelastic Approach,” J of Biomechanics, Apr. 2010, v 43, pp. 1118-1124. (EI, SCI)

63.  R.-J. Chen, C.-C.K. Lin, M.-S. Ju, “In situ Transverse Elasticity and Blood Perfusion Change of Sciatic Nerves in Normal and Diabetic Rats,” Clinical Biomechanics, June 2010, v 25, pp. 409-414. (EI, SCI)

64.  P.-C. Kung, C.-C. K. Lin, M.-S. Ju, “Neuro-rehabilitation robot assisted assessments of synergy patterns of forearm, elbow and shoulder joints in chronic stroke patients,” Clinical Biomechanics, Aug 2010, v 25, pp. 647-654. (EI, SCI)

65.  Y.-T. Yang, C.-C.K. Lin, J.-D. Liao, C.-W. Chang, M.-S. Ju, “Continuous depth-sensing nano-mechanical characterization of living, fixed and dehydrated cells attached on a glass substrate,” Nanotechnology, Jul 2010, v 21, 285704. (EI, SCI).

66.  C.-C.K. Lin, Y.N. Sun, M.-S. Ju. “Cortical Activation by Tactile Stimulation to Face and Anterior Neck Areas: An fMRI Study with Three Analytic Methods,” Human Brain Mapping, Dec 2010, v 31, n12, 1876-1885. (EI, SCI)

67.  H.-L. Lin, C.-C.K. Lin, M.-S. Ju, J.-D. Liao, "In vivo impedance evaluation of Au/PI microelectrode with surface modulated by alkanethiolate self-assembled monolayers", Biomedical Microdevices, Feb 2011, v13, n1, pp. 243-253. (EI, SCI)

68.  R.-J. Chen, C.-C.K. Lin, M.-S. Ju, “Quasi-Linear-Viscoelastic Properties of PC-12 Neuron-Like Cells Measured Using Atomic Force Microscopy,” J of Inst of Chinese Eng., Apr 2011. v34, n3, pp. 325-335. (EI, SCI)

69.  W.-C. Huang, J.-D. Liao, C.-C.K. Lin, M.-S. Ju, “Depth-Sensing Nano-indentation on a Myelinated Axon at various Stages,” Nanotechnology, Jul 2011, v22, n27, 275101. (online)

70.  P.-C. Kung, C.-C. K. Lin, M.-S. Ju, S.-M. Chen, “Reducing abnormal synergies of forearm, elbow and shoulder joints in stroke patients with neuro-rehabilitation robot treatment and assessment,” J of Medical & Biological Engineering, Apr 2011 (accepted) (EI, SCI)

71.  B.K. Fang, C.-C. K. Lin, M.-S. Ju, “Adaptive control of ionic polymer-metal composite in air and under water by using a modified direct self-tuning regulator embed with integral action,”  Smart Materials & Structures, 31 Oct 2011, v20, n10, 105016 (on-line). (EI, SCI)

72.  C.-C. Chiang, M.-S. Ju, C.-C. K. Lin, “Description and Computational Modeling of the Whole Course of Status Epilepticus Induced by Low Dose Lithium-pilocarpine in Rats,” Brain Research. Oct 2011, vol. 1417, pp. 151-162.(SCI)

73.  C.-C. Chan, C.-C.K. Lin, M.-S. Ju, “Estimation of ankle joint angle from peroneal and tibial electroneurograms - A muscle spindle model approach,” J Mechanics in Medicine and Biology, Oct. 2011 (accepted).(SCI)

74.  W.-C. Huang, C.-K. Yao, J.-D. Liao, C.-C.K. Lin, M.-S. Ju, “Enhanced Schwann Cell Adhesion and Elongation on a Topographically and Chemically Modified Poly(L-latic acid) film Surface,” J Biomed Mater Res A, Nov 2011, v99A, n2, pp.158-165.(SCI)

75.  C.-H. Huang, M.-S. Ju, C.-C.K. Lin, "A Robust Algorithm for Removing Artifacts in EEG Recorded duringFMRI/ EEG Study," Computers in Biology and Medicine, Dec 2011 (accepted).

76.  C.-T. Chang, C.-C. K. Lin, M.-S. Ju, “Morphology and Local Mechanical Properties of PC-12 Cells Studied by 3 Integrating Atomic Force Microscopy and Immunofluorescence Imaging,” Tran ASME J Biomech Eng, Oct. 2011 (in revision).

77.  Y.-T. Yang, J.-D. Liao, C.-C. K. Lin, C.-T. Chang, S.-H. Wang, M.-S. Ju, “Characterization of Cholesterol-depleted or –restored Cell Membranes by Depth-sensing Nano-indentation,” Soft Matter, 2012, v8, n3, pp.682-687. (SCI)

　

~Top~

　

B. 研討會論文

　

1.      Ming-Shaung Ju and Joseph M. Mansour, "Application of Simulation Sensitivity Analysis to Functional Neuromuscular Stimulation of Gait," The 1987 ASME Biomechanics Symposium, Cincinnati, Ohio, U.S.A., June 14-17, 1987, pp. 327-330.

2.      J.M. Mansour and M.S. Ju, "Corrective Strategies for Abnormal Gait in Paraplegics," 34th Annual Meeting, Orthopaedic Research Society, Feb. 1-4, 1988, Atlanta, Georgia, U. S. A.

3.      蔚順華, 朱銘祥, 周有禮, 吳濬哲, 薛澤杰, "人體步態中擺盪期間力學模式," 中華民國七十六年, 醫學工程科技研討會， 中壢， 中原大學。

4.      Ming-Shaung Ju, "Non-linear Control of Biped During Double Limb Support Phase," Proceedings of The Second National Workshop on Automation Technology, April 1988, pp. 36-42.

5.      Ming-Shaung Ju and Chih-Jung Hsu,  "The Automatic Modelling of Mechanical Systems on A Personal Computer," Proceedings of The Second National Workshop on Automation Technology, April 1988, pp. 469-475.

6.      Ming-Shaung Ju, "The Derivation of Equations of Motion for Large Scale Linked System-with application to the Analysis of Normal Gait and Pathological Gait," Proceedings of the 12th National Conference on Theoretical and Applied Mechanics, Dec., 1988, pp. 959-969.

7.      Ming-Shaung Ju, "The Modelling of Human Gait-A Survey," Proceedings of The 1988 R.O.C. Biomedical Engineering Conference, pp. 54-55.

8.      J.H. Lin, M.S. Ju and Y.L. Chou, "A Mechanical Model for Swing Phase of Above-Knee Constant Friction Prosthesis with Application to Optimal Design," Proceedings of The 1988 R.O.C. Biomedical Engineering Conference, pp. 50-51.

9.      S.H. Wei, Y.L. Chou, M.S. Ju and J.J. Wu, "A Mechanical Model for Swing Phase of Normal Gait and Quantitative Analysis of Inertia in B/K Prosthesis," Proceedings of the 1988 R.O.C. Biomedical Engineering Conference, pp. 56-57.

10.  M.S. Ju, J.H. Lin and Y.L. Chou, "Dynamical Optimal Design of Above-Knee Constant Friction Prostheses," 1989 Advances in Bioengineering, ASME, pp.55-56.

11.  Ming-Shaung Ju, Yao-Chung Chiang and Ming-Hsiao Yang, "The Optimal Design of Nutation Damper Rings - A Symbolic Approach," Proceedings of The Third National Conference on Automation Technology, July 1989, pp. 189-198.

12.  M.H. Yang and M.S. Ju ,"Active/Passive Controller Design of a One-link Flexible Robot Arm," The First International Conference on Automation Technology, July 1990, Taipei, Taiwan, R.O.C.

13.  M.P. Lo and M.S. Ju, "Applied an Intelligent Interface Environment for a Computer-Aided Control Engineering System," The First International Conference on Automation Technology, July 1990, Taipei, Taiwan, R.O.C.

14.  M.S. Ju , T.C. Hsueh and Y.L. Chou, "The Evaluation of Effects of Pulling Angle and Force on Intermittent Cervical Traction," Seventh Meeting of the European Society of Biomechanics, July 8-11, 1990, Aarhus, Denmark.

15.  H.F. Lin and M.S. Ju, "Prediction of Muscle Force of Lower Extremities during Double Support Phase of Human Gait,"  The Six International Conference on Biomedical Engineering, December 6-8, 1990, Singapore.

16.  M.S. Ju, "Dynamical Analysis and Design of Above-Knee and Below-knee Prostheses," Proceedings of 1990 RSA-ROC Bilateral Symposium on Biomedical Engineering, October 29-30, 1990, Taipei , p. 53. (invited paper)

17.  M.S. Ju and C.J. Hsu, "Automatic Modeling of Mechatronic System via Symbolic Approach," The 7th Conference of Chinese Society of Mechanical Engineers, Nov., 10-11, 1990.

18.  汪廷凱，朱銘祥，施明璋， 電液控制膝上義肢關節之模擬研究， 中華民國七十九年醫學工程研討會。

19.  C.D. Tsai, M.S. Ju and Y.G. Tsuei, "Modal control by Modal Force Technique," ASME, 13th Biennial Conference on Mechanical Vibration and Noise, Sept., 1991, Miami, U.S.A.

20.  T.Y. Chen, M.S. Ju, C.Y. Lee and M.P. Lo, "Computer-Controlled Pulse Laser System for Dynamic Holography," SPIE, 1991.

21.  T.K. Wang, M.S. Ju and Y.G. Tsuei, "Electro-Hydraulic control of Above Knee Prostheses," The Fourth National Workshop on Automation Technology, pp. 463-471, 1991, Taipei, R.O.C.

22.  C.D. Tsai, M.S. Ju and Y.G. Tsuei, "Modal control by Modal Force Technique," The Fourth National Workshop on Automation Technology, pp. 473-482, 1991, Taipei, R.O.C.

23.  S.Y. Chen, M.S. Ju, Y.G. Tsuei  and E.K.L. Yee, "Modeling and Control  of Structures by Modal Force Technique," The Fourth National Workshop on Automation Technology, pp. 483-490, 1991, Taipei, R.O.C.

24.  Y.J. Perng, M.S. Ju and Y.L. Chou, "Three Dimensional  Gait Analysis of Above- Knee Amputees," Annual Symposium of the Biomedical Engineering Society, R.O.C. 1991, pp.166-172.

25.  吳安泰,朱銘祥,崔永晉, "模糊與自調控制於撓性機械臂之比較研究", 中華民國第十五屆自動控制研討會論文集, pp. 39-48,八十年十二月。

26.  H.M. Hu, S.Y. Chen, M.S. Ju and Y.G. Tsuei , "Comparison of Component Modal Synthesis Methods,"  Tenth International Modal Analysis Conference, Feb. 3 - 7, 1992, San Diego, U.S.A.

27.  S.Y. Chen, M.S. Ju, Y.G. Tsuei  and E.K.L. Yee, "Linear Structure Control by Modal Force Technique," Structural Dynamics & Material Conference, April 1992, Dallas, U.S.A.  (also AIAA  Technical  paper   92-2321-CP)

28.  H.S. Chuang and M.S. Ju, "Development of An Expert Control System,"  IEEE International Symposium on Industrial Electronics, May 25-27, 1992, Xian, China.

29.  P.J. Tsai, M.S. Ju & Y.G. Tsuei, "Experimental Electro-Hydraulic Control of Above-Knee Prostheses," International Symposium on Biomedical Engineering in the 21st Century, Sep. 23-26, 1992, Taipei, R.O.C.

30.  易聲宏, 朱銘祥, 崔永晉, 周有禮, 吳濬哲, "四連桿油壓式膝上義肢之模糊控制," 中華民國八十一年醫學工程科技研討會論文集, pp. 348-352.

31.  S.P. Chu, M.S. Ju and Y.G. Tsuei, "Vibration Modes of Operated Structures," Proc. of 9th National Conference on Mechanical Engineering, CSME, pp.381 - 387, Nov. 1992, Kaohsiung.

32.  Shih-Fu Ling and Ming-Shaung Ju, "Design of a monitoring system of cutting tool wear", Proceedings of Menutech 92, pp.B1/1-8, Singapore.

33.  Charles Hsu, M.S. Ju and Y.G. Tsuei, "Extraction of Normal Modes from Experimental Data,"  Eleventh International Modal Analysis Conference, Kissimmee, Florida, U.S.A., Feb. 1 - 4, 1993.

34.  H.M. Hu, M.S. Ju and Y.G. Tsuei, "Comparison Study of Modal Synthesis Methods,"  Eleventh International Modal Analysis Conference, Kissimmee, Florida, U.S.A., Feb. 1 - 4, 1993.

35.  M.S. Ju, Y.Y. Chung and Y.G. Tsuei, "Development of Electromagnetic Actuator for Structure Control,"  Sixteenth National Automatic Control Conference, Tainan, March 1993.

36.  M.S. Ju, M.C. Chang and Y.G. Tsuei, "CMAC Learning Control of  a Class of Nonlinear Systems," Sixteenth National Automatic Control Conference, Tainan, March 1993.

37.  D.L. Yang and M.S. Ju, "Adaptive Fuzzy Control Based on Natural Control Laws," First National Symposium on Fuzzy Theory and Applications Conference, June 25-26, 1993, Hsinchu, pp.50 - 57.

38.  S.Y. Chen, M.S. Ju and Y.G. Tsuei, "A Simple Method for Extracting Normal Modes," Proc. of  14th ASME Biennial Conference on Mechanical Vibration and Noise, Sept. 19-22, 1993, Albuquerque, DE-Vol. 64, pp. 1-8.

39.  N.Y. Yu, F.C. Su, J.J. Chen, T.C. Huseh and M.S. Ju, "Development of FES Standing System for Paraplegics," 中華民國八十二年醫工科技研討會論文集, pp. 116-117.

40.  M.S. Ju, Y.F. Yang and T.C. Hsueh, "Development of Actively Controlled Electro-Hydraulic Above-Knee Prostheses," 10th CISM-IFToMM Symposium on Theory and Practice of robots and Manipulators, Sep. 12-15, 1994, Gdsak, Poland.

41.  M.S. Ju and L.T. Chang, "Adaptive Control of a Magnetically Levitated Structure," Jointed Hungarian-British International Mechatronics Conference, Sep. 21-23, 1994,  Budapest, Hungary.

42.  M.S. Ju, Y.F. Yang, T.C. Hsueh and K.F. Huang, "Gait Control of Electro-Hydraulic Above-Knee Prostheses", The First Medical Engineering Week of the World, Sept. 25-29, 1994, Taipei.

43.  D.G. Huang, J.J. Chen, M.S. Ju, N.Y. Yu & T.C. Hsueh, "Development of FES Cycling Control System with Auxiliary Motor and Adjustable Seat," Annual Symposium of the Biomedical Engineering Society, R.O.C., 1994, pp. 12-13. (NSC 84-0412-B-006-022 M08)

44.  J. L. Gau, J. J. Chen, M.S. Ju & T. C. Hsueh, "Quantitative Analysis of Stretch Reflexes in Spastic Subjects," Annual Symposium of the Biomedical Engineering Society, R.O.C., 1994, pp. 24-25. (NSC 84-2331-B-006-054 M08)

45.  W.H. Chao, J.J. Chen & M.S. Ju, "Real-Time Control of FES-Cycling System with DSP Processor,"  Annual Symposium of the Biomedical Engineering Society, R.O.C., 1995, pp. 15-16.

46.  P.F. Liao, M.S. Ju & T.C. Hsueh, "EMG Controlled Above-Knee Prostheses,"  Annual Symposium of the Biomedical Engineering Society, R.O.C., 1995, pp. 195-197. (NSC 84-2213-E-006-103)

47.  S.N. Lin, M.S. Ju, J.-J. J. Chen & T.C. Hsueh, "Coordinated Control of Trunk and Knee in Functional Electrical Stimulation Standing of Paraplegia,"  Annual Symposium of the Biomedical Engineering Society, R.O.C., 1995, pp. 198-200.

48.  P.S. Huang and M.S. Ju, "Model-Based Self-Organizing Fuzzy Control," Proceedings of the Twelfth National Conference of the Chinese Society of Mechanical Engineers, Nov. 24-25, 1995, Chia-Yi, R.O.C.,  pp. 35-41.

49.  黃美燕, 朱銘祥, 張志涵, 陳家進, “功能性電刺激踩車生物力學模式發展,” 中華民國八十四年度生物力學研討會論文集, pp. 166-167.(NSC 84-2815-C006-01-033E)

50.  Y.S. Hsu, M.S. Ju, T.S. Lin & J.-J. Chen, "Quantitative Measurement of Spastic Hypertonic Muscles by Frequency Response Method," Symposium of 1995 R.O.C. Biomechanics Conference, pp. 147-148.(NSC 85-2331-B-006-080-M08)

51.  何志傑、方炎坤、朱銘祥、張振鵬、陳瑾瑩，“利用微機電系統技術研製鈦酸鉛鐵電薄膜紅外線感測器之數值分析與性能評估”，中國材料科學學會1997年度年會論文集(E-09): 鐵電材料之製程及性質，Volume E-09, Proceedings of the 1997 Annual Conference of the Chinese Society for Materials Science, pp.36-39, Nov., (1997).

52.  Y.K. Fang, Jyh-Jier Ho, C.Y. Chen and M.S. Ju, “Performance Evaluation of Lead-titanate (PbTiO3) Pyroelectric Thin-film Infrared Sensors with Temperature Isolation Improvement Structure by MEMS Technologies”, 微機電及微感測器研討會，國立成功大學, pp.79-87, Nov., (1997).

53.  陳景欣，何志傑，朱銘祥，方炎坤,〝單晶矽微型壓力感測器之設計〞，中華民國八十六年醫學工程科技研討會論文集，pp. 67-69.

54.  H.-M. Li, M.-S. Ju, J.-J. J. Chen & T.-S. Lin, “Time-Course Analysis of Stretch Reflexes in Hemiparetic Subjects,” The ROC Biomedical Engineering Society 1997 Annual Symposium, pp. 179-180, Chung-Li, Dec. 1997.

55.  F.-S. Yang, B.-T. Ann, J.-J. J. Chen, M.-S. Ju & L.-L. Fu, “Development of a DSP-Based Fuzzy Logic Controller for FES-cycling System,” The ROC Biomedical Engineering Society 1997 Annual Symposium, pp. 290-291, Chung-Li, Dec. 1997.

56.  J.Z. Shey, C.S. Chen & M.S. Ju, “Application of Single-Chip Micro-Controller to Pneumatic Above-Knee Prosthesis,” The ROC Biomedical Engineering Society 1997 Annual Symposium, pp. 389-390, Chung-Li, Dec. 1997.

57.  J.H. Yang, C.I. Chou & M.S. Ju, “Biomechanical and Biocybernetic Study of Hypertonia in Stroke,” The ROC Biomedical Engineering Society 1997 Annual Symposium, pp. 441-442, Chung-Li, Dec. 1997.

58.  Jyh-Jier Ho, Y.K. Fang, C.Y. Chen, G.S. Chen and M.S. Ju, “Performance Evaluation of a Lead-titanate (PbTiO3) Pyroelectric Thin-film Infrared Sensors with Temperature Isolation Improvement Structure by MEMS Technologies”, SPIE (Society of Photo-Optical Instrumentation Engineers), Photonics Taiwan ‘98 Asia Pacific Symposium, vol. 3419, pp. 236-243, July 11 (1998).

59.  陳景欣, 何志傑, 朱銘祥, 方炎坤, “單晶矽微型壓力感測器之設計,製造與測試,” 中國機械工程學會第15屆全國學術研討會, pp.1-4, November (1998)。

60.  Jyh-Jier Ho, Y.K. Fang, C.R. Huang, G.S. Chen, M.S. Ju, T.Y. Chen and C.Y. Chen, “Design and Test of a Micro-pressure Sensor for Applications in Rehabilitation Engineering”, 1998 International Conference on Mechatronics Technology (ICMT’98), Taiwan, pp.589-593, 02 Dec. (1998).

61.  Jyh-Jier Ho, Y.K. Fang, C.Y. Chen, G.S. Chen and M.S. Ju, “Performance Evaluation of Ethanol Gas Sensors Integrated with a Solid-State Heater by the Technology of Micro-electro-mechanical System”, 1998 Proc. International Electron Devices & Materials Symposium, A4-6, pp.133-135, Dec. (1998).(榮獲中華民國電子材料與元件協會87年度之「傑出論文獎」)

62.  王政道，林宙晴，朱銘祥, 〝運用μ波為控制源之研究〞，中華民國八十七年醫學工程科技研討會論文集，pp. 3-4.

63.  湯孝威，蔡宏名，朱銘祥，謝孟達，林錫璋，方晶晶，蘇芳慶, 〝肝臟注射用進針穿刺系統之研製〞，中華民國八十七年醫學工程科技研討會論文集，pp. 252-253.

64.  侯勝發，陳炘鏞，朱銘祥, 〝LIGA-like製程製造微型陀螺儀〞，第三屆奈米工程暨微系統技術研討會，pp. 3-153~3-159，1999/5

65.  陳昭榮、林宙晴、朱銘祥“外加扭矩對中風病人肘關節主動角度軌跡追蹤控制之研究”中國機械工程學會第十六屆全國學術研討會論文集，pp.463-468。

66.  王政道、林宙晴、朱銘祥、徐善慧“大拇指自主動作對腦波不同頻寬之影響”中國機械工程學會第十六屆全國學術研討會論文集，pp.469-472。

67.  湯孝威、蘇芳慶、朱銘祥、林錫璋“CT影像導引穿刺治療定位用機械人研究”中華民國八十八年醫學工程科技研討會論文集，pp.46-47。

68.  林俊旺、林宙晴、朱銘祥“以肘關節單擺法量化中風病人痙攣程度”中華民國八十八年醫學工程科技研討會論文集，pp.148-149。

69.  陳秋旺、朱銘祥、謝孟達、張慧怡、陳家進“肘關節復健用機械人之研究”中華民國八十八年醫學工程科技研討會論文集，pp.150-151。

70.  宋秉翰、陳秋旺、朱銘祥“醫學工程用六軸測力計之研製”中華民國八十八年醫學工程科技研討會論文集，pp.154-155。

71.  侯勝發、朱銘祥“以Quasi-LIGA-like製程製造微型陀螺儀”中華民國八十八年醫學工程科技研討會論文集，pp.333-334。

72.  J.-J. Ho, Y.K. Fang, S.F. Ting, G.S. Chen, M.S. Ju, M.C. Hsieh, T.Y. Chen, C.Y. Chen and K.H. Wu, “Design and Fabrication of a MEMS Pressure Sensor for Rehabilitation Engineering Applications,” Proceedings of the 1999 Bioengineering Conference, pp. 455-456, Big Sky, Montana, June 16-20, 1999.

73.  C.C. Lin, M.S. Ju and J.R. Chen, “Influences of Constant External Loads on Voluntary Control of Elbow Joint in Health and Post-Stroke Subjects,” 2000 Chicago 2000 World Congress on Medical Physics and Biomedical Engineering, Chicago, USA, July 23-28, 2000.

74.  C-C. Lin, M-S. Ju and C-W. Lin, “Preliminary results of performing pendulum test in upper limbs,” 12 th Conference of the European Society of Biomechanics, Dublin, Ireland, Aug. 27-30, 2000.

75.  林棟煌, 朱銘祥, 黃英修, 程琡敏, “模糊理論應用於肘關節復健用機器人”, 中華民國八十九年生醫科技論文研討會, Dec. 15-16, 2000, 台北.

76.  鄭恆星, 朱銘祥, 林宙晴, “以肌電訊號外加扭矩以改善中風患者肘部運動-EMG之處理”, 中華民國八十九年生醫科技論文研討會, Dec. 15-16, 2000, 台北.

77.  朱銘祥, “生醫微機電系統在復健工程之應用”,  生物奈微米技術成果發表會, 國科會工程處工程科技推展中心, Mar. 30th, 2001, 台南成功大學.

78.  M.S. Ju, D.-H. Lin, C.-C. Lin, I.-S. Hwang & S.-M. Chen, “Application of Fuzzy Control Theory in Development of a Robot for Neuro-Rehabilitation of Elbow,” 2001 Bioengineering Conference, Snowbirth, Utah,  June 27-July 1, 2001.

79.  M.S. Ju, J.-J. Chen, T.-S. Lin & C.-C. Lin, “Development of Medical Mechatronic Systems for Clinical Researches,” 2001 International Conference on Mechatronic Technology, Singapore June 6-8, 2001.

80.   C.C.K. Lin, M.S. Ju & H.S. Cheng, “Increasing Elbow Torque Output of Stroke Patients by EMG-Controlled External Torque”, IEEE  EMBC Oct., 2001.

81.  董憲奇，朱銘祥，林宙晴，黃英修，程琡敏，"肘關節神經復健用機器人之改進與臨床評估"，中華民國生物醫學工程科技研討會，pp. 45, 2001.

      

      82.  陳志瑋，林宙晴，朱銘祥，"類神經網路作即時mu波鑑別之研究"，中華民國生物醫學工程科技研討會，pp. 48, 2001.

      83. 宋秉翰，朱銘祥，林宙晴，"具壓力監測之神經義肢用銬型微電極研究"，中華民國生物醫學工程科技研討會，pp. 47, 2001.

84. 林昌緯，朱銘祥，林宙晴，"周邊神經受力學與電學作用下之分析與模擬"，中華民國生物醫學工程科技研討會，pp. 47, 2001.

85.  M.S. Ju, “Design of Cuff Electrodes for Neural Prostheses”, 2002 International Symposium of Biomedical Engineering and Technology, Kun-Sian University of Technology.

86.  C.-C. K. Lin. M.S. Ju & B.H. Soung, “Designing a Pressure Sensor for Cuff Electrode,” 2002 Nano-engineering and Micro-system Technology Conference, Tainan, Nov. 21-22, 2002.

87.  朱銘祥, 林昌緯, 林宙晴,”周邊神經之橫向生物力學特性”,台灣生物力學學會學術研討會論文集, pp.33-34.

88.  朱銘祥, 林宙晴, 董憲奇, 程琡敏, 黃英修, ”引導上肢圓形運動之動態剛性”,台灣生物力學學會學術研討會論文集, pp. 85-86.

89.  李真甄, 朱銘祥, 蘇芳慶, “放血對血壓的影響”, 台灣生物力學學會學術研討會論文集, pp. 105-106.

90.  90H.-S. Cheng, M.-S. Ju, and C.-C. K. Lin, “ENG signals as control source - a preliminary study,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002.

91.  91C.-W. Chen, M.-S. Ju, and C.-C. K. Lin, “Real-time identification of  wave with wavelet neural networks,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002.

92.  C.-T. Tseng, M.-S. Ju, C.-C. K. Lin, and C.-H. Chang, “Integration of micro pressure sensors and cuff electrodes for neural prostheses,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002.

93.  93S.-Y. Wu, M.-S. Ju, C.-C. K. Lin, I.-S. Hwang, and S.-M. Chen, “Treatment trial of using robot for neuro- rehabilitation of upper extremities,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002. (best paper award)

94.  94S.-L. Chaung, M.-S. Ju, and C.-C. K. Lin, “Preprocessing EEG by adaptive noise cancellation and instaneous envelope methods for brain-computer interface,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002.

95.  J.-L. Fan, J.-Q. Li, M.-S. Ju, and C.-C. K. Lin, “In vivo biomechanical analyses of peripheral nerves,” Proc. 2002 Conference on BME Technology, Kaohsiung, December 14-15, 2002.

 96. Chi-Way Chen, Ming-Shaung Ju, Chou Ching K. Lin, “Real-Time Identification of m Wave with Wavelet Neural Networks,” 1st International IEEE EMBS Special Topic Conference on Neural Engineering, Italy, March 17, 2003.

 

　

~Top~

　

C.  專書、技術報告等

1. 朱銘祥， 軸承滑油迴旋對於汽機轉子穩定性之影響， 台灣電力公司委託研究案報告， 中華民國七十七年七月。

2. 朱銘祥， 電腦代數於多剛體系統之應用(I)， 國科會專題研究報告， 中華民國七十七年六月。

3. 朱銘祥， 調質式章動阻尼環之設計試製與測試(I)， 中山科學院委託研究報告， 中華民國七十七年六月。

4. 顏鴻森， 黃文敏，朱銘祥， 機構創造設計之專家系統(一)， 國科會專題研究報告， 中華民國七十七年六月。

5. 朱銘祥， 調質式章動阻尼環之設計試製與測試(II)， 中山科學院委託研究報告， 中華民國七十八年六月。

6. 朱銘祥， 汽機末段葉片振動之分析與量測， 台灣電力公司委託研究案報告， 中華民國七十八年十二月。

7. 朱銘祥， 電腦代數於多剛體系統之應用(II)， 國科會專題研究報告， 中華民國七十九年三月。

8. 邱澄彬， 陳聯文， 蔡明俊， 陳元方， 朱銘祥， 汽機末段葉片振動之分析與量測 ， 第二期報告書， 中華民國七十九年十二月。

9. 朱銘祥, "步態分析於生物力學之發展," 機械工程第180期, 中華民國八十年四月, PP. 30-35。

10.  朱銘祥， 施明璋， 膝上義肢之設計與控制研究 (I) ， 國科會專題研究報告， 中華民國八十年八月。

11.  崔永晉， 朱銘祥， 模力法與有限元素法於結構控制之比較研究 (I)， 中華民國八十年八月。

12.  朱銘祥,"義肢之研製," 醫療器材之研究發展與醫療儀器之管理與維護,王正一彙編, 國立臺灣大學醫學工程中心, 中華民國八十一年四月。

13.  朱銘祥， 膝上義肢之設計與控制研究 (II)， 國科會專題研究報告，中華民國八十一年八月。

14.  崔永晉， 朱銘祥， 模力法與有限元素法於結構控制之比較研究 (II)， 中華民國八十二年一月。

15.  FUZZY 技術交流手冊， 行政院科技顧問組校編， 中華民國八十二年一月， pp. 61-62。

16.  崔永晉， 朱銘祥， 何旭彬﹐ "機車車架之模態分析測試"， 光陽公司委託學術機構研究報告， 中華民國八十二年五月。

17.  崔永晉， 朱銘祥， 何旭彬﹐ "工具機之模態分析測試"， 東台公司委託學術機構研究報告， 中華民國八十二年六月。

18.  朱銘祥， 磁浮結構控制研究 (I)， 國科會專題研究報告， 中華民國八十二年八月。

19.  朱銘祥，膝上義肢之設計與控制研究(III)，國科會專題研究報告，中華民國八十三年八月。

20.  M.S. Ju and L.T. Chang, "Adaptive Control of a Magnetically Levitated Structure,"  in Mechatronics - the basis for new Industrial Development, ed by M. Acar, J. Makra & E. Penney, Computational Mechanics Publications, Southampton, pp. 643-648, 1994.

21.  朱銘祥， 中風病人肌肉痙孿程度量測系統之發展，國科會專題研究報告，中華民國八十四年九月。

22.  朱銘祥，肌電圖控制膝上義肢研究，國科會專題研究報告，中華民國八十四年八月。

23.  朱銘祥，氣壓擺盪控制之四連桿膝上義肢研究，國科會專題研究報告，NSC 85-2313-E-006-080-025, 中華民國八十五年八月。

24.  朱銘祥，中風病人肌肉痙攣之生物力學與控制研究（I），國科會專題研究報告，NSC 85-2331-B-006-080-M08, 中華民國八十五年十月。

25.  朱銘祥，中風病人肌肉痙攣之生物力學與控制研究（II），國科會專題研究報告，NSC 86-2314-B-006-108-M08, 中華民國八十六年十月。

26.  朱銘祥，功能性電刺激站立研究, 國科會專題研究報告，NSC 86-2213-E-006-057, 中華民國八十六年十月。

27.  朱銘祥，微機電系統於復健工程之整合研究（I），國科會專題研究報告，NSC 87-2218-E-006-015, 中華民國八十七年十月。

28.  朱銘祥，中風病人肌肉痙攣之生物力學與控制研究（III），國科會專題研究報告，NSC 87-23

　

~Top~

D. 專利

1.  方炎坤、朱銘祥、何志傑、陳景欣、謝明君、丁世汎、吳宗憲, 接觸式微壓阻剪應力感測器, 中華民國專利發明第144224號, 中華民國九十一年三月四日